How do I convert a Signo TechLiner Regular length (5.75") to a Pilot G2 refill kit?

To convert your Uni-Ball Signo TechLiner Regular length (5.75") to a Pilot G2 refill, all that's needed is a Pilot G2 shorty refill kit.

To assemble, you will need to replace one of the Shorty tail washers with your current Signo tail washer.

1.  Unscrew your TechLiner from the tip to protect the body from the clip (if installed)

2.  Remove and set aside the Signo tail washer (part 4 in the picture below)

2.  Replace one washer from the G2 Shorty setup (part 5 in the picture below) with the Signo tail washer (part 4 above).

If you feel the refill is too loose or tight, you can add or remove the other washer as needed.