TechLiner FAQ

The Ti2 TechLiner is Patented

The Ti2 TechLiner Regular and Shorty lengths are designed to host different refills, while the TechLiner Super Shorty is designed for a single refill.  As of January 2016 all TechLiner Regular and Shorty lengths are shipping with the UniBall™ .7mm Jetstream refill.  Prior to 1/2016 Techliner Regular and Shorty lengths were shipped with UniBall™ Signo refills (either .5mm or .7mm).  

***PLEASE NOTE***  Each Refill takes a specific setup.  The set ups are not interchangeable with refills.  Set ups are interchangeble with the TechLiners.  Meaning all TechLiners can accept different refills (except the Super Shorty), you just need a set up specific to the refill. 

Which Refill Do I have?

JetStream

UniBall™ Jetstream Refills have the part# SXR-7 stamped on it.  The last number "7" in the part# refers to the tip size.  In this instance "7" = .7mm.  This is the Refill currently shipping with all TechLiner Pens.  All sizes (SXR-3, SXR-5, SXR-7, SXR-10) work with this set up.

Signo

UniBall™ Signo Refills have the part# UMR-85N stamped on it.  The last number "5" in the part# refers to the tip size.  In this instance "5" = .5mm.   All sizes (UMR-81N, UMR-83N, UMR-85N, UMR-87N) work with this set up. 

TechLiner JetStream Refill Assembly (regular length 5.75")

JetStream Internal Parts breakdown.  TechLiners with the Jetstream refill come with 6 internal parts.

Parts List

1.  Jetstream ring magnet*

2.  Jetstream O-ring

3.  Jetstream front ring spacer

4.  Jetstream refill

5.  Jetstream tail spacer (***regular length versions only)

6.  Tail magnet* (same for JetStream and Signo)

*Magnets are directional.  Inserting them reversed will cause the magnetic cap to repel.   

TechLiner JetStream Refill Assembly (Shorty length 5")

JetStream Internal Parts breakdown.  TechLiners with the Jetstream refill come with 6 internal parts.

Parts List

1.  Jetstream ring magnet*

2.  Jetstream O-ring

3.  Jetstream front ring spacer

4.  Jetstream refill

5.  Jetstream shorty tail washer (***shorty length versions only) (**** only used with a clip installed)

6.  Tail magnet* (same for JetStream and Signo)

*Magnets are directional.  Inserting them reversed will cause the magnetic cap to repel. 

TechLiner JetStream to Pilot G2 conversion (regular and Shorty length)

All that's needed is a Pilot G2 (or G2 Pro) retractable pen from any local supply store.  "Retractable pen" is important because the spring along with the refill will be used from the G2 pen (refills alone don't include the spring).

1.  Remove the refill and spring from a retractable Pilot G2 pen

2.  Place the cap on the tail of your TechLiner and unscrew the tip (to secure the rear magnet)

3.  Remove and replace the refill

4.  Replace the o-ring (2) and front spacer (3) with the Pilot G2 spring

5.  Keep the tip magnet*, tail spacer and tail magnet* in same position (see Jetstream refill assemblies above for tail spacer reference based on length)

*Magnets are directional.  Inserting them reversed will cause the magnetic cap to repel.  

TechLiner Signo Refill Assembly (regular length 5.75")

Parts List

1.  Signo ring magnet*

2.  Signo wave washer x2

3.  Signo refill

4.  Signo tail spacer (***regular length versions only)

5.  Tail magnet* (same for JetStream and Signo)  

*Magnets are directional.  Inserting them reversed will cause the magnetic cap to repel.   

TechLiner Signo Refill Assembly (shorty length 5")

Parts List

1.  Signo ring magnet*

2.  Signo wave washer x2

3.  Signo refill

4.  Signo shorty tail washer (***shorty length versions only) (**** only used with a clip installed)

5.  Tail magnet* (same for JetStream and Signo)  

*Magnets are directional.  Inserting them reversed will cause the magnetic cap to repel.  

TechLiner Super Shorty Refill Assembly (Super Shorty 4.0")

The Super Shorty was designed to utlize the Pilot G2 Mini (Pilot's Pixie line)

Parts List

1.  Pilot G2 Mini ring magnet*

2.  Pilot G2 Mini spring spacer

3.  Pilot G2 Mini refill

4.  Pilot G2 Mini tail washer

5.  Tail magnet* (same for JetStream and Signo)  

*Magnets are directional.  Inserting them reversed will cause the magnetic cap to repel.